• LocationSt Ives, Cambridgeshire, Bridge Street, PE27 5EH**
  • Our Working HoursOpening times: 24 hours a day*
  • Phone Us!Call Now: 0344 947 0955

Call Now : 0344 947 0955

We Can Help Today!

Express St Ives glaziers replace glass for a variety of reasons. we provide an emergency response service for broken glass repairs where we would board the windows for your security and then replace the glass usually within 48 hours in and around the St Ives area.

Glass in St Ives commercial properties that should be but doesnt meet safety requirements can be replaced with safety glass. All enquiries are welcome with free estimates and quotes by phoning our St Ives team.

Glass for use in St Ives domestic properties typically comes in two varieties; single or double-glazed, with a choice of either float/annealed or toughened glass. Single-glazed windows with float glass can normally be fitted on the same day. Our St Ives glaziers are able to replace glass from either the outside or the inside of properties, if the framework allows it. If required, we can source scaffolding and/or lifting vehicles for high glass installations.

Contact us

St Ives Glazing Testimonials

Customer Name: Julian Jenkins.
I recently had work carried out by your group. I am writing to inform you of my satisfaction on the standard of the work and the approach of the engineers.
My wife and I were impressed by the engineers manner; we found them to be courteous and helpful. They contacted us over the phone on two occasions to arrange a time for them to call and on both occasions were true to their word and punctual.
I honestly believe them to be a credit to your company and even though I acknowledged their workmanship at the time, I would appreciate it, if you would let them know of my satisfaction of their part in the task carried out.
Thank you for a job well done!

Want to speak to an expert?
Call: 0344 947 0955

Example Of Our Glass Services

Cat & Dog Flaps
Given a sufficiently large pane of glass, we can manufacture and install a pane of glass, with a hole pre-cut for the flap. We cannot work on existing toughened glass (due to the high tension in the glass), any pressure applied to the glass would cause the destruction of the glass. It is possible to cut normal glass in situ, but as this is at the owner's own risk, it is not recommended. There must be a minimum clearance of 150mm between the edge of the glass, and the edge of the hole of the flap, so the glass is able to go through the toughening process and remain intact.

Book one of our experts, today

Click To Get a Free Quote

Calls made will not be charged

Top